Tungsten Alloy Military Swaging Rod
Item No.: 012
Swaging greatly increases tungsten alloy rod's ultimate tensile strength. The ultimate tensile strength of regular tungsten alloy rod is 1050 MPa . However, after swaging, the ultimate tensile strength can reach 1200 MPa min, we can even control tungsten
INQUIRY
Buy At Wish Buy At Alibaba
Description
Tungsten Alloy Swaging Rod for Military Video
Tungsten Alloy Military Swaging Rod
Swaging greatly increases tungsten alloy rod's ultimate tensile strength. The ultimate tensile strength of regular tungsten alloy rod is 1050 MPa . H o wever , after swaging, the ultimate tensile strength can reach 1200 MPa min, we can even control tungsten alloy military swaging rod at 1400 MPa. Tungsten alloy military swaging rod is one of our main products. The composition of tungsten alloy military swaging rod is 93%WNiFe. Our common types:
Diameter: 12mm~20mm, Length: less than 400mm; Diameter: 20mm~400mm, Length: less than 500mm.
We can manufacture other products according to customers' specific requirements.
15.8 - 18.75 g/cm3, 20 - 35 Tungsten Alloy Swaging Rod for Military; Tungsten Alloy Rod Used In The FJFB-3 3-die Set Contiguity and hardness variation in sintered, heat-treated and swaged tungsten alloy.
Tungsten Alloy Swaging Rod Main Properties :
* High density
* High melting point
* Small volume
* Excellent hardness
* Superior wearing resistance
* High ultimate tensile strength
* High ductility
* High temperature resistance
* Low vapor pressure
Military Application of Tungsten Alloy Swaging Rod
Tungsten alloy swaging rod can be used in military defense, such as depleted uranium kinetic energy penetrators, bullet, armor piercing, armor piercing bullets, sniper rifle penetrator, etc.
Main Processing of Tungsten Alloy Swaging Rod:
1). Mixing
2). Pressing
3). Sintering
4). Heat treatment
5). Swaging
6). Machining
Repeated heat treatment and swaging is performed need at least several times.
In this w a y , tungsten alloy swaging rod can be improved at tensile strength as well decrease elongation and impact toughnes.
Tungsten Alloy Swaging Military Rod Properties Table
Composition
Processing
Density
g/cm3
Tensile strength
Min. Mpa
Elongation
Min.%
Hardness
Min. HRC
Impact Energy
J/cm2
90WNiFe
Heat treatment
17.10±0.15
1000-1100
18-29
25-29
170
92.2WNiFe
Heat treatment
17.60±0.15
900-1000
15-25
25-29
170
Swaging
1300-1500
8-18
35-45
120
91.7WNiFe
Heat treatment
17.65±0.15
1000-1100
15-25
25-29
170
93 WNiFe
Heat treatment
18.10±0.10
900-1000
15-25
25-30
160
94 WNiFe
Heat treatment
17.90±0.10
900-1000
15-25
25-30
160
95 WNiFe
Heat treatment
18.10±0.15
900-1000
12-20
25-31
160
Swaging
1300-1450
6-12
35-45
120
96 WNiFe
Heat treatment
18.30±0.15
900-1000
12-18
25-31
160
Swaging
1300-1450
6-12
35-45
120
97 WNiFe
Heat treatment
18.3±0.15
800-900
9-13
28-31
130
YOU MAY ALSO BE INTERESTED IN THE FOLLOWING PRODUCT(S)